Clip-on Dial Thermometer

Part of your tasks for monitoring the control of legionella is to take regular temperature readings of both the flow temperature (hot water pipe coming out) of the hot water storage vessel and the return temperature (hot water pipe going back into) of the hot water if it is applicable to your particular storage vessel.

This task can sometimes prove more difficult if:

• There is no dial on the actual vessel itself giving the temperature readings needed
• The hot water pipes in question are lagged (i.e. insulated with foam or another material) which doesn't leave much exposed pipework
• The pipes needing to be monitored are in a difficult location to reach or get to

One way is to use a surface probe thermometer similar to the one found on this page but another option is to have a dial fitted to the surface of the pipe for minimal expense which will give you an accurate reading whenever you need it.

This easy to use surface pipe thermometer features a 60 mm diameter nickel plated dial and indicates temperature over the range of 0 to 120°C. The 50 mm diameter dial face has a clear, graduated scale indicating temperature in 2°C divisions.

Each thermometer is supplied with a wrap-around spring kit (53mm long) for pipe mounting. For larger pipes it is possible to attach the thermometer to pipework using either tie-wraps or wire (not supplied).

Cost (incl. fitting) £10 each (incl. VAT)

Product Code: (01-04)

To make a purchase and for further information on this or any other product or services call:

Vectair Environmental Ltd on 0118 981 7437 or get in touch via our contact page.